logo
Trang chủ
Các sản phẩm
Về chúng tôi
Tham quan nhà máy
Kiểm soát chất lượng
Liên hệ chúng tôi
Yêu cầu báo giá
Tin tức
TOGETHER HTL LTD
Nhà Tin tức

Can PU Mesh Panels Be Installed on an Existing Stack Sizer Machine?

TẬP ĐOÀN HTL LTD là một công ty rất tốt, tôi rất sẵn lòng hợp tác với quý công ty, an toàn, hiệu quả, chuyên nghiệp, trung thực, vui vẻ! Cảm ơn quý công ty đã cung cấp cho tôi dịch vụ và sản phẩm ổn định. -----EUROPAT

—— EUROPT CÔNG NGHIỆP

Tôi trò chuyện trực tuyến bây giờ
Công ty Tin tức
Can PU Mesh Panels Be Installed on an Existing Stack Sizer Machine?
tin tức mới nhất của công ty về Can PU Mesh Panels Be Installed on an Existing Stack Sizer Machine?

Yes. PU mesh panels can be installed on many existing Stack Sizer machines, provided the panel dimensions, fixing arrangement, tensioning system and aperture specification match the existing equipment. Stack Sizer machines already use polyurethane screening media, so the question is not whether PU can work but whether a specific alternative panel fits a specific deck. Confirm machine model, panel dimensions, edge profile, tensioning direction, aperture size and polyurethane formulation before ordering, and trial one deck before converting the whole machine.

Key Takeaways

  • PU is already standard on Stack Sizers. The machines are designed for polyurethane media, so replacement is an established application rather than an experiment.

  • Compatibility is more than panel size. Edge profile, tensioning direction and fixing points determine whether a panel seats correctly.

  • Aperture specification is a separate check. A panel that fits physically can still change cut size or reduce effective open area.

  • Polyurethane properties matter. Formulation and hardness should match mineral abrasiveness, feed size, slurry temperature and water chemistry.

  • Modification is often unnecessary when the panel is manufactured to the existing interface, but must be confirmed per machine.

  • Trial before full conversion. One deck, comparable feed, defined indicators and cost per tonne as the decision metric.

Summary Table



Item Description
Function Replacing existing Stack Sizer screening media with compatible PU panels
Material Polyurethane panels, often with LANXESS raw material and customised specifications
Aperture Micron or mesh size, shape, orientation matched to the required product distribution
Application Fine wet screening in mineral processing, iron ore, copper ore, gold, industrial minerals
Service Life Depends on formulation, feed, deck position and operating conditions
Benefits Alternative procurement, potential service-life improvement, maintained screening performance

Definition

Stack Sizer refers to a multi-deck fine wet screening machine in which several screening surfaces are arranged vertically and tensioned with a drawbolt system.

Replacement compatibility here means the condition in which an alternative PU panel matches the existing deck's dimensions, edge profile, tensioning arrangement and aperture specification sufficiently to install and operate without structural modification.

HT48-30 is the product designation of HTL's PU mesh panel offered for Stack Sizer replacement applications.

Working Principle

Stack Sizer screening media operates under specific mechanical and process conditions, and replacement compatibility depends on matching both.

Mechanical fit. The panel must match deck length, width, thickness and screening-area dimensions. The edge profile must engage the drawbolt tensioning system correctly, in the correct tensioning direction, with fixing points aligned to the deck. A panel that is dimensionally close but has a different hook profile will not tension correctly, and will fail early through movement or edge wear.

Aperture specification. Opening size in microns or mesh, aperture shape and orientation determine the cut size and separation efficiency. Effective open area determines capacity. A replacement panel with a different aperture may fit the deck and still fail the process requirement.

Material properties. Polyurethane formulation and hardness determine wear resistance, elasticity and impact absorption. The correct specification depends on mineral abrasiveness, feed particle size, slurry temperature and water chemistry. A general-purpose panel may not suit a severe application, and a heavily filled panel may crack in a high-impact one.

Operational fit. Deck position matters. The top deck of a Stack Sizer typically sees different loading and wear than lower decks. A single panel specification across all decks is not always the best configuration.

Benefits

  • Alternative procurement reducing single-source dependency on the original equipment manufacturer.

  • Potentially improved service life where the replacement formulation suits the application better.

  • Customised screening specifications matched to the plant's cut size and product distribution.

  • No structural modification in many cases, when the panel is manufactured to the existing interface.

  • Maintained screening performance when aperture and open area are matched correctly.

  • Cost-per-tonne improvement when service life and efficiency gains outweigh price differences.

Applications

  • Iron ore fines screening where fine wet screening and wear resistance both matter.

  • Copper ore fine screening ahead of classification and flotation.

  • Gold ore processing where screening efficiency affects downstream recovery.

  • Industrial minerals where tight cut sizes require precision apertures.

  • Tailings duty where fine screening and dewatering occur together.

  • Base metal concentrators using Stack Sizer technology in grinding circuits.

These duties sit between size reduction in CRUSHING and downstream CLASSIFICATION or DEWATERING. A panel change alters the size distribution reaching the next stage.

Material Comparison



Property PU Panel (HT48-30 type) Original OEM Polyurethane Woven Wire Mesh Rubber Screen Media
Stack Sizer compatibility Specified configurations Direct fit Not applicable Not applicable
Abrasion resistance Good Good Moderate Good–excellent
Fine aperture capability Good Good Good Limited
Procurement flexibility High Single source Depends on supplier Depends on supplier
Customisation scope Broad Limited Moderate Moderate
Best application Fine wet screening replacement Original equipment Clean dry fine duty Coarse impact zones

Application Comparison



Scenario Dominant Constraint Recommended Direction
OEM panel lead time or price problem Procurement Evaluate HT48-30 type PU panel with full specification match
Existing panels wearing prematurely Wear life Review formulation and deck position before changing supplier
Aperture specification not met Separation Confirm aperture size in microns, shape and orientation
Edge profile differs from original Mechanical fit Re-measure hook profile against drawing before ordering
Machine previously repaired or modified Dimensional drift Verify actual dimensions rather than relying on original drawing
Fine cut with tight tolerance Open area and accuracy POLYURETHANE FINE SCREEN PANEL evaluation

Industry Application Matrix



Industry Typical Material Stack Sizer Duty Replacement Priority
Iron ore Hematite, magnetite fines Fine screening ahead of classification Wear life and aperture match
Copper Copper ore fines Grinding circuit classification Efficiency and open area
Gold Gold ore fines Pre-concentration and classification Cut size accuracy
Coal Coal fines Desliming and preparation Wet handling and blinding
Industrial minerals Pub Thời gian : 2026-11-17 09:09:51 >> danh mục tin tức
Chi tiết liên lạc
TOGETHER HTL LTD

Người liên hệ: Mr. Maple

Tel: +86 17778255675

Fax: 86--311-80690567

Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi (0 / 3000)